Laticrete Heavy Duty Sealer, Water Based – StoneTech – 1 Quart Laticrete StoneTech

LATICRETE HEAVY DUTY SEALER, WATER BASED – STONETECH – 1 QUARTT

• Advanced penetrating microbond protection

•Maximum protection against all stains

• Makes cleaning stone easier

• Preserves natural look

• Water-based low-solids coating

• Interior & exterior

• To use on natural stone such as marble, granite, limestone, slate, terrazzo, travertine & sandstone.

• Best suited for the most porous stone surfaces.

STONETECH® Professional tile and stone care and maintenance products are innovative, easy-to-use solutions to protect and preserve stone against the damaging effects of everyday living. With a complete line of products to protect, clean and transform stone surfaces, LATICRETE® will help ensure the beauty of natural stone and tile countertops, floors, walls and other installations for generations to come.

Read entire label before using. Use only as directed. Test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for at least 72 hours prior to application. Be sure surface is clean, thoroughly dry and free of sealers, waxes and coatings. . Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated. Sealer may be applied to damp surfaces one hour after standing water has been removed. Liberally apply an even coat using a paint pad, low-pressure chemical-resistant sprayer, roller or brush. Allow sealer to penetrate the surface for 15-30 minutes. During this time, distribute excess over entire area to insure even penetration. Wipe entire surface thoroughly with clean dry towel. A second coat may be needed for porous, absorbent surfaces and should be applied 30-40 minutes after initial application as directed in steps 3-4. A minimum of 15 minutes after final application, wipe entire surface with a clean dry towel to remove any excess sealer. If needed, dampen white nylon pad with sealer to remove residue and dry again thoroughly with clean dry towel. A full cure is achieved after 24-72 hours; foot traffic may begin in 6-8 hours. Cover with red rosin paper, if foot traffic must resume before the recommended time periods have passed. Clean equipment with water. Size and Coverage – Pint: 25 – 150sq. ft. Expected Wear: 3-5 years on interior surfaces & 1-3 years on exterior surfaces. Avoid skin and eye contact. Wear protective eyewear and gloves. Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area during application and drying.