NCL Bare Bones – Low Odor Stripper – 1 Gallon NCL

BARE BONES LOW ODOR STRIPPER

• Superior floor stripping formula

• For light and normal buildup

• Strips burnished floor finish

BARE BONES® LOW ODOR is a superior floor stripping formula that can be used anywhere, anytime! Like the original BARE BONES that set the standard for performance and labor savings some 20 years ago, BARE BONES® LOW ODOR from NCL provides the same rapid penetration and complete removal of even heavily burnished floor finish in a low odor formula that can be used in hospitals, schools and universities and office buildings.

NCL chemists have designed a wetting system that keeps BARE BONES® LOW ODOR working at maximum effectiveness, with powerful film removing action easily cuts through multiple layers of finish easily! BARE BONES® LOW ODOR is a must for all professional floor care systems.

Dilute BARE BONES® LOW ODOR following dilution recommendations below. Dilute using cold or mildly warm water only.

Light/Normal Buildup: 8 oz per gallon of water (1:16)

Heavy Buildup (Burnished): 20 oz per gallon of water (1:5)

Mop/Wet Vacuum Stripping System: Apply liberally with a mop to an area small enough so as not to allow the product to dry and allow to stand for 3 to 5 minutes. Agitate with a mop and remove solution and old finish with a wet vacuum. Allow floor to dry thoroughly and apply new finish as directed by manufacturer. If complete stripping is not accomplished repeat the above procedure before re-application of recommended NCL Floor Finish.

Floor Machine Stripping System: Allow to stand for 3 to 5 minutes, scrub with a rotary floor machine or automatic scrubber equipped with stripping pads. Remove solution and old finish with a wet vacuum and allow floor to dry completely. If desired, a rinsing step can be added. Apply recommended NCL Floor Finish as per instructions.

Note: As some asphalt tiles may be damaged by prolonged soaking in concentrated strippers, a spot test is recommended before general use.